Home Premiere Ensembles Husserl Husserl ~ PanelSet B Full Modulation Matrix

Full Modulation Matrix

In Husserl, any sequencer channel can trigger and change the notes of any other sequencer. If a master sequencer channel triggers a slave, the slave can even trigger and modulate the master channel's note which triggered it. The modulation routings are enabled with single-click pins in a modulation matrix.

Full Modulation Matrix (Click image for bigger view)

On the B panel, you can view and change all matrix pins at once, a total of over 1000 pins! Whenever a trigger or modulation is active from any channel, its highlight ring flashes. The flash occurs regardless whether the trigger or modulation is actively being used by the current channel, to show the input is available. The B panel also contains buttons to activate or turn off the matrix input to each sequencer channel. When turned off for any channel, the background is muted.

You can also view and change the matrix for individual sequencers, together with all other controls for each sequencer, on the A panel. Changes on the A panel appear on the B panel, and vice versa. On both the A and B panels, a highlight ring around the pitch pin indicates a change in the modulation value from each modulation source. Also, triggers from the modulation matrix are only available when the trigger type is MATRIX, so trigger pins are now hidden in other mode.

See the A panel reference for detailed information on the matrix columns.

Version Notes

v099 added the full modulation matrix view in the B panelset.

Last Updated on December 02, 2009